Double telecom band thermo-optic switch based on dual-line filled photonic liquid crystal fibres

We demonstrate a thermo-optic switch based on photonic liquid crystal fibres (PLCFs) in which two lines of air hole are selective filled with liquid crystal (LC), with a high extinction ratio of more than 20 dB around 1310 nm and 1550 nm. Only in the range of 2.0°C it can perform a turn off and on operation of transmitted light in the second telecom band around 1550 nm while the first telecom bands around 1310 nm is still on. Due to the splitting of the bandgap, the switching function is achieved in this kind of PLCFs. Before the cleaning point (CP) of LC, a broad bandgap from about 1120 nm to 1320 nm splits into two ones, which are continuing inducing huge bandgap extension to shorter wavelength and longer wavelength after the CP of LC, respectively. Moreover, the temperature responses around the CP of LC is also investigated. Its sensitivity is about ?92.32 nm/°C around the CP of LC. Therefore, such kind of selective-filled PLCFs could find potential applications as thermo-optic switch and temperature sensor in the telecom band.     

Director configurations in nematic droplets with tilted surface anchoring

The polymer dispersed nematic liquid crystal (LC) with the tilted surface anchoring has been studied. The droplet orientational structures with two point surface defects – boojums and the surface ring defect – are formed within the films. The director tilt angle α = 40° ± 4° at the droplet interface and LC surface anchoring strength W_s ~ 10^–6 (J m^?2) have been estimated. The bipolar axes within the studied droplets of oblate ellipsoidal form can be randomly oriented are oriented randomly relatively to the ellipsoid axes as opposed to the droplets with homeotropic and tangential anchoring.     

Enhancement of electrical conductivity,director relaxation frequency and slope of electro-optical characteristics in the composites of single-walled carbon nanotubes and a strongly polar nematic liquid crystal

In the present work, single-walled carbon nanotubes (SWCNTs) were dispersed in a room temperature nematic liquid crystal 4-pentyl-4′-cyanobiphenyl at the concentration of 0.02 and 0.05 wt%. Differential scanning calorimetry and temperature-dependent dielectric studies suggest decrease in clearing temperature of the composite materials as compared to the pure material. Ionic conductivity increases by two orders of magnitude due to the dispersion of such a low concentration (0.05 wt%) of SWCNTs. Dielectric studies also show that the presence of the SWCNTs decreases the effective longitudinal as well as transverse components of the dielectric permittivity. For homeotropic aligned samples, a relaxation mechanism has been detected in the lower MHz region both for the pure as well as dispersed samples. Presence of SWCNTs increases the relaxation frequency corresponding to flip-flop motion of molecules around their short axes. From frequency-dependent dielectric studies, important dielectric parameters such as relaxation frequency, dielectric strength and distribution parameters have been determined. Electro-optical experiments show that the threshold voltage decreases and the steepness of the transmission voltage curve improves due to the dispersion of SWCNTs.     

Dye-dependent studies on droplet pattern and electro-optic behaviour of polymer dispersed liquid crystal

In order to study the droplet pattern and electro-optic (EO) behaviour of polymer dispersed liquid crystal (PDLC) with the addition of dye, dichroic polymer dispersed liquid crystal (DPDLC) films were prepared using a nematic liquid crystal (NLC), photo-curable polymer (NOA 65) and anthraquinone blue dichroic dye (B2), in equal ratio (1:1) of polymer and liquid crystal (LC) by polymerisation induced phase separation (PIPS) technique. Dichroic dye was taken in different concentration (wt./wt. ratio) as 0.0625%, 0.125%, 0.25%, 0.5% and 1% of the LC mixture in DPDLC films. Initially, in an open circuit when there is no proviso for external electric field (0 V), LC droplets in polymer matrix exhibited bipolar pattern, though on closing the circuit with the increase of electric field pattern of droplets starts changing, LC molecules align along the direction of applied electric field and aligned completely relatively at higher field (30 V), which illustrate vertical radial pattern. Further, results show that the DPDLC film containing 0.0625% dye concentration with consistent average droplet size ~4.30 μm, exhibits the best transmission at lower operating voltage.     

Polymer network liquid crystal grating/Fresnel lens fabricated by holography

In this article, polymer network liquid crystal (PNLC) grating/Fresnel lens is fabricated by holography. The exposure light pattern for the grating is obtained by interfering two planar wave fronts, while the Fresnel pattern is achieved by interfering a planar wave front and a spherical wave front. Owing to the alignment effect and anchoring power of polymer network, the holographic PNLC grating achieves improved diffraction efficiency, and remarkably reduced operation voltage (reduced by 80%) compared with holographic polymer-dispersed-liquid-crystal and holographic polymer-stabilised blue-phase liquid-crystal gratings, while maintaining submillisecond response. Moreover, it achieves high spatial frequency with a 2-μm grating period, thanks to the holographic fabrication. The holographic PNLC Fresnel lens also exhibits attractive electro-optical properties.     

Main-chain biodegradable liquid crystal based on cholesteryl end-capped polycarbonate copolymers

Main-chain biodegradable liquid crystal (LC) based on cholesteryl end-capped polycarbonate copolymers was investigated. The novel LC was synthesised through ring-opening copolymerisation of trimethylene carbonate with ε-caprolactone (CL) initiated by cholesterol, without adding any catalyst. The chemical structure of the resulting polymers was confirmed by ¹H NMR. The liquid crystalline properties were validated by X-ray diffraction, differential scanning calorimetry and polarising optical microscopy. The results showed that the synthesised polycarbonate copolymers Chol-(TMCL)x + y exhibited liquid crystallinity in particular temperature ranges because of the incorporation of the cholesterol moieties. Furthermore, the effect of CL content on the mesomorphism properties of Chol-(TMCL)_x+y was also investigated; the higher the CL content, the lower the mesomorphism properties. It might be attributed to the hindered orientation of LC caused by the crystallinity of the poly(ε-caprolactone) (PCL) segments in the polymer chain.     

氯化原位接枝过程与聚合物高性能化

氯化原位接枝过程是一种基于自由基反应的改性聚合物新方法,经该方法改性的聚合物性能显著改变,充分展现了弱影响、强响应的特征。本文简述了氯化原位接枝反应过程、机理,剖析了氯化原位接枝产物的结构特征,并对各类接枝共聚产物结构与性能关系进行了归纳和总结。详细介绍了各类接枝产物的不同用途,例如用于热塑性弹性体、木板粘合剂、增韧改性剂、成膜涂料等。最后对氯化原位接枝过程更广泛的应用及今后的发展趋势进行了展望。     

Using flow field-flow fractionation (Fl-FFF) for observation of salinity effect on the size distribution of humic acid aggregates

Flow field-flow fractionation (Fl-FFF) was used to investigate the effect of salinity on the size distribution of humic acid (HA) aggregates in estuarine water. In water with high salinity as estuarine water, size distributions were slightly broadened with increasing contact time between HA and estuarine water. At the longest contact times (89 days) and highest salinity value (28 psu, g kg^?1), the peak maxima were observed at 1.7 and 8.6 nm when detected at 254 nm, and at 1.9 and 9.1 nm when detected at 400 nm. In addition, Fl-FFF with an inductively coupled plasma mass spectrometry was applied to examine the effect of salinity on the size distribution of Cd, Ce, Cu, Mn and Pb-binding HA aggregates in estuarine water with different salinity values. At 1 day contact time, the peak maxima of Cd, Ce, Cu, Mn and Pb-binding HA aggregates in water with increased salinity values were increased and gave the larger breadth of size distribution. The larger size fraction of HA aggregates showed more affinity for Pb, Cd, Ce and Mn than Cu whereas the smaller size fraction of humic aggregates showed preferential binding towards Cu.     

Simultaneous determination of sulfoxaflor and its metabolites,X11719474 and X11721061, in brown rice and rice straw after field application using LC-MS/MS

The present study was carried out to develop an analytical method for simultaneously detecting and quantifying sulfoxaflor and its metabolites (X11721061, X11719474) in brown rice and rice straw using liquid chromatography–tandem mass spectrometry. The parent compound and its metabolites were extracted and purified using original ‘QuEChERS’ method with modification. The matrix-matched calibration curve of sulfoxaflor and its metabolites in both matrices achieved good linearity with determination coefficients (R²) ≥0.9944. The overall recoveries of sulfoxaflor at two fortification levels (rice: 0.2 and 1.0 mg/kg; rice straw: 0.4 and 2.0 mg/kg) ranged from 97.37% to 107.71% with relative standard deviations (RSDs) <5%. On the other hand, the recoveries of both metabolites (X11721061 and X11719474) at 0.1 and 0.5 mg/kg (rice) and 0.2 and 1.0 mg/kg (rice straw) were satisfactory with values ranging from 83.70 % to 112.60% with RSDs <8%. During storage at ?20°C, the analyte and its metabolites were stable for up to 87 days. The limits of quantification of 0.02 mg/kg were lower than the maximum residue limit (0.2 mg/kg) set by the Korean Ministry of Food and Drug Safety for brown rice. The method was successfully applied to paddy field treated with different programme schedules and a preharvest interval of 7 days was proposed based upon the current study. In sum, the developed method is accurate and reproducible for ensuring the reliable determination of sulfoxaflor (and its metabolites) in harvested rice grain and straw samples from the field. The residual level of parent compound does not seem to pose any hazardous effect and treated rice could be safely used for consumption.